Safety And Responsibility; Intended Use; Spare Parts - horsch Transformer 6 VF Operating Instructions Manual

60014762 • 1 • 03/2020 • en

2 Safety and responsibility

The following warnings and safety notes apply to all sections in these operating in-
structions.
The machine has been built in accordance with latest technical standards and gener-
ally accepted safety regulations. However, risks for life and limb of the operator or
third parties and impairment of the machine or other material assets can occur dur-
ing use.
Ø Pay attention to the following warning and safety notes before using the ma-
chine.

2.1 Intended use

The machine is intended to be used as carrier of tools for the cultivation of row
crops on agricultural areas. The frame of the machine can be moved here toward
the side according to the requirements of the row crops. Only cultivation tools ap-
proved by HORSCH may be used.
The intended use also includes taking note of and observing the notes and instruc-
tions given in these operating instructions, observing all pictograms and warnings
on the machine, observing all maintenance and repair intervals and complying with
the defined technical limits and areas of application.
When participating with the machine in public road traffic, the respective national
registration and traffic law must also be complied with.
Any other kind of use of the machine contradicting the above, is considered not as
intended, especially:
• Connecting/attachment to an agricultural tractor that is not suitable.
• Working with the machine when persons are present in the danger zone. This
especially includes riding along on the machine.
• Carrying out maintenance and/or repair work on a machine that has not been
shut down or secured against restarting.
HORSCH does not assume any liability for damages resulting from the unintended
use of the machine.

2.2 Spare parts

Genuine spare parts and accessories from HORSCH have been specially designed for
this machine.
Spare parts and accessories which are not delivered by us have not been tested or
approved by us.
The installation or use of other than HORSCH products can therefore negatively af-
fect the design characteristics of the machine and thus impair the safety of man and
machine.
HORSCH will not assume liability whatsoever for damage resulting from the use of
non-original parts and accessories.
If the component to be replaced is marked with a safety sticker, these stickers must
also be ordered and attached to the spare part.
9