Snorkel AB46JE Operator's Manual page 58

Chapter 12 – Troubleshooting
Symptom
Electrical outlet does not
work.
Hydraulic fluid temperature of
200°F (93°C) or more.
Severe hydraulic leak.
54
Possible Cause
Power supply not plugged in.
GFCI is tripped.
Prolonged boom operation.
High pressure fluid return to reservoir
caused by kinked or twisted hose.
Hydraulic system component failure.
Failure of hose, tube, fitting, seal,
etc.
Corrective Action
Plug a source of power into the power-
input connector on the wiring box.
Push reset button on outlet.
Stop operation until fluid cools.
Remove the kink or twist from the hose.
Let fluid cool before operating.
Stow the machine and do not operate until
repairs are made.
Do not operate machine until repairs are
made.
AB46JE – 0260072