Furuno Inmarsat FleetBroadband FELCOM251 Installation Manual page 45

2. INSTALLING THE SYSTEM
4. Attach the compass safe distance label at the
location shown in the right figure.
5. Attach the supplied label ("INMAR") to a no-
ticeable location.
How to change modem settings
1. Press [Menu], [*], [2], [8], [6] and [4] keys in this sequence to enter the mainte-
nance mode.
The fax machine beeps for approximately one second and displays "MAINTE-
NANCE" on the LCD. This means the FAX is in the initial stage of the maintenance
mode.
2. Press [1] and [0] keys in this order. "WSW00" is displayed on the LCD.
3. Press [1] and [3] keys in this order. "WSW13=00011011" appears on the LCD.
4. Press [0], [0], [0], [1], [1], [0], [1], [0] and [OK] keys in this order. "WSW00" appears
on the LCD.
5. Press [1] and [9] keys in this order. "WSW19=11100000" appears on the LCD.
6. Press [1], [1], [1], [0], [0], [0], [1], [0] and [OK] keys in this order. "WSW00" appears
on the LCD.
7. Press [Stop/Exit] key to return the machine to the initial stage of the maintenance
mode.
8. Press [9] key twice to exit from the maintenance mode and return to standby.
"Please Wait." appears then return the normal display.
2-32
Compass safe
1
distance label