Furuno Inmarsat FleetBroadband FELCOM251 Installation Manual page 31

2. INSTALLING THE SYSTEM
2.3.5 How to lift Antenna Unit (FB-1501)
For FB-1501, the optional antenna lifting fixture is necessary to lift the Antenna Unit.
Antenna lifting fixture: Type 16-025-5508, Code number 001-537-470
Procedure
1. Put the assembled rope over the Antenna Unit from above.
The lower loop in the rope cradle is open in order to allow you tie it.
2. Cover the part of the radome which contacts the assembled rope for antenna with
protective material (locally supplied rubber mat, etc.), to prevent damage to the
radome when hoisting it to the mounting location.
3. Tie the lower rope to hang on the bottom of the Antenna Unit.
The rope should be tied firmly to secure and support the antenna.
4. Lift the Antenna Unit to the mounting location.
Put the assembled rope
over the Antenna Unit
with the open end side
facing downwards.
2-18
Put the assembled
rope over the
Antenna Unit.
Protective
material
Tie the rope.