Sony Ericsson K700i Working Instruction, Mechanical page 9

Step-by-Step Instructions
11 NOTE!
PCB and frame are connected by camera
flexfilm.
Release the PCB from the frame by overturning
the frame as the picture shows.
NOTE!
Be careful with the tweezers and do not damage
the board-to-board connector.
Disconnect the camera flexfilm board-to-board
connector by lifting upwards with the flex film
assembly tool.
Front, frame and PCB disassembled.
3/00021-1/FEA 209 544/83 A

Company Internal Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
9(37)