Sony Ericsson K700i Working Instruction, Mechanical page 34

Step-by-Step Instructions
2 Take the camera assembly and assemble the
camera conductive gasket as the picture shows
(1).
The Camera Part (VGA) is delivered as spare
Part without the conductive gasket mounted. For
full functionlity of the phone it is very important
that the gasket is mounted according to
instruction.
Place the camera assembly into the cavity and
lift the frame up.
Press the camera assembly to the bottom of the
cavity with your fingers.
Turn the frame assembly around and check that
the camera grommet edge is visible all around
the frame opening (arrows).
•
Assemble the phone as described in 2 Reassembly
3/00021-1/FEA 209 544/83 A

Company Internal Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
34(37)