Sony Ericsson K700i Working Instruction, Mechanical page 14

Step-by-Step Instructions
2 NOTE!
Press the PCB down to make it easier when
assemble the flexfilm.
Assemble the two flexfilms on both FPC
connectors using the flex film assembly tool.
Assure that flexfilms are pushed all the way into
the connector.
NOTE!
Be very careful not to damage the FPC
connector clamp when closing it. The clamp
may fall off and then the connector must be
replaced (electrical repair).
Close the two FPC connectors with a blunt pair
of tweezers.
3 Assemble the keyboard foil flexfilm into the
FPC connector. Use flex film assembly tool.
Close the FPC connector with a blunt pair of
tweezers.
Press down the keyboard foil close to the system
connector.
4 Assemble the system connector plug.
Align the two tabs (1).
Press on the plug as the picture shows (2) to
assure that the system connector plug is placed
in the recess.
NOTE!
Assure that system connector plug is properly
fitted close to the frame before assembling metal
carrier and front.
3/00021-1/FEA 209 544/83 A

Company Internal Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
14(37)