Sony Ericsson K700i Working Instruction, Mechanical page 17

Step-by-Step Instructions
9 Place the keyboard into the front.
NOTE!
Assure that the front glass is clean.
Use air blow equipment.
NOTE!
If you have assembled a new front:
Remember to remove the protection foil
inside the front, with a pair of tweezers,
before assembling. Be careful not to scratch
the glass with the tweezers.
10 Place the frame assembly over the front, make
sure that the keypad is correctly fitted in the
frontcover and press on all sides where front
snap fit hooks are located (1A-1J). Click sounds
are heard when hooks fastens into the frame.
NOTE!
If Antenna Cover already is mounted continue
with battery and battery cover assembly - go to
picture 13 and 14.
11 NOTE!
If the antenna cover has been disassembled -
proceed with picture 11 and 12 for assembly.
Place the Volume/Camera key (1) and
Internet access key (2) into the antenna cover.
12 Place the phone, in correct position, into the top
of the antenna cover.
NOTE!
Be careful as keys easily fall out from its
position.
3/00021-1/FEA 209 544/83 A

Company Internal Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
17(37)