Sony Ericsson K700i Working Instruction, Mechanical page 15

Step-by-Step Instructions
5 NOTE!
Do not touch the display glass with your fingers.
Assemble the display flexfilm into the FPC
connector. Use the flex film assembly tool.
Close the FPC connector with a blunt pair of
tweezers.
Assemble a new connector tape over the display
and keyboard foil connectors.
Gently fold the display to the proper position by
using the frame guiding pin and press with your
fingers.
NOTE!
If you have assembled a new display:
Remember to remove the display protection
foil with a pair of tweezers before assembling
the metal carrier.
3/00021-1/FEA 209 544/83 A

Company Internal Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
15(37)