Sony Ericsson K700i Working Instruction, Mechanical page 8

Step-by-Step Instructions
9 Open the keyboard foil assembly FPC connector
with a pair of tweezers.
Remove the keyboard foil assembly from the
FPC connector.
10 NOTE!
Be very careful not to damage the FPC
connector clamp when opening it. The clamp
may fall off and then the connector must be
replaced (electrical repair).
Open the two FPC connectors, in arrows
direction, with a blunt pair of tweezers. The dark
(brown/black) part of the connector is the
moveable part (clamp).
Remove the flexfilm from both FPC connectors
by using the flex film assembly tool.
3/00021-1/FEA 209 544/83 A

Company Internal Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
8(37)