A-frame ladder. adjusts to fit pools 48 inch to 54 inch. ladder must be attached to pool frame - do not use with inflatable pools. swing up section of ladder must be installed on outside of pool weight limit 300 lbs. (6 pages)
Page 1
ALL PLASTIC INPOOL LADDER ASSEMBLY AND INSTALLATION MANUAL Assembly video available online: www.conferplastics.com WEIGHT LIMIT 250 LBS. Note: 10 Lbs of sand required • 635-52X Fits Decks 46"-56" (See Step 2) • Easy Assembly • Adjustable Handrail Mounting System *Model 635-52X is a...
Page 2
CONFER PLASTICS, INC. Model #635-52X ASSEMBLY INSTRUCTIONS - PLEASE READ BEFORE ATTEMPTING ASSEMBLY Adjustable Parts List Tools Needed for Assembly Tubes 2 - Handrails * Sand - 10 lbs Mounting 1 - Ladder Section * Cordless Drill Motor Ladder Blocks 1 - Platform * 1/8"...
Page 3
#10 x 1-1/4" screws per ADDITIONAL ACCESSORIES mounting block. Drill three holes through each side of each handrail at the pre-marked For #635-52X Ladder locations. Fasten using three #10 x 1-1/4" screws. SKIM-IT EB 100-3" RISER...
Page 4
Never use an electric drill in or around the pool. CONFER PLASTICS, INC. FIVE YEAR WARRANTY Confer Plastics, Inc. warrants their swimming pool ladders and steps to be free from defects in workmanship for five years from date of purchase.