Table of Contents
Advertisement
1.5 Connecting Terminal
(1)
Power Interface: used for connecting the power adapter. The voltage of series
products is
DC12V
not allowed, in order to avoid damage of the cameras.
(2)
Network Interface: 10/100M self-adapting Ethernet interface is used to
connect the camera with various network equipments, such as, switch, router
and hub. When it is connected to 10M network, the orange lamp is also on.
When it is connected to 100M network, the green lamp is always on.
(3)
Reset Button: When the camera fails to function during incorrect operation or
accidental failure (e.g. forget IP address or password), or it is used in different
scenes, press down the button for above 5s after a delay of 30s from powering
on to restore the camera to its factory default. The default user's name is
"admin", the default password is "admin" and the default IP address is
"192.168.1.88".
Overview
AC and the current is not lower than 1.5A. Other power is
7
1
2
3
Advertisement
Table of Contents
