Installing Child Restraints Using A Seat Belt; Rear-Facing ⎯ Baby Seat (Infant Seat); Child Seat - Toyota Avanza Owner's Manual

Installing child restraints using a seat belt

Rear-facing ⎯ Baby seat (infant seat)/child seat (convertible
■
seat)
1
Place the child restraint sys-
tem on the seat facing the
rear of the vehicle.
2
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
3
Install a locking clip near the
tab of the lap and shoulder
belt by inserting the lap and
shoulder webbing through
the recesses of the locking
clip. Buckle the belt again. If
the
release the buckle and rein-
stall the locking clip.
AVANZA_OM_General_OMBZ214
belt has any slack,
1-1. For safe use
53
1