Installing Child Restraints Using A Seat Belt - Toyota AYGO Manual

Installing child restraints using a seat belt

Rearward-facing  Baby seat/child seat
■
1 Place the child restraint sys-
tem on the rear seat facing
the rear of the vehicle.
2
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
3
Install a locking clip near the
tab of the lap and shoulder
belt by inserting the lap and
shoulder webbing through
the recesses of the locking
clip. Buckle the belt again. If
the
release the buckle and rein-
stall the locking clip.
AYGO_EE_OM99J92E
belt has any slack,
1-1. For safe use
59
1