Driver’s Side Instrument Panel (Right-Hand Drive Vehicles); After A Fuse Is Replaced; If There Is An Overload In A Circuit; When Replacing Light Bulbs - Toyota Avanza Owner's Manual

278
7-3. Do-it-yourself maintenance
Driver's side instrument panel (Right-hand drive vehicles)

Remove the cover.
3
Remove the fuse.
4
Check if the fuse is blown.
1
Normal fuse
2
Blown fuse
Replace the blown fuse with a new fuse of an appropriate amperage rat-
ing. The amperage rating can be found on the fuse box lid.
Type A


After a fuse is replaced

■
If the lights do not turn on even after the fuse has been replaced, a bulb may
●
need replacement. (→P. 280)
If the replaced fuse blows again, have the vehicle inspected by your Toyota
●
dealer.

If there is an overload in a circuit

■
The fuses are designed to blow, protecting the wiring harness from damage.

When replacing light bulbs

■
Toyota recommends that you use genuine Toyota products designed for this
vehicle. Because certain bulbs are connected to circuits designed to prevent
overload, non-genuine parts or parts not designed for this vehicle may be
unusable.
AVANZA_OM_General_OMBZ214
Type B
