PIONEER DJ CDJ-3000 Instruction Manual page 86

It takes a long time to read a storage device (SD, USB) (flash
memory or hard disk).
• It may take some time to read a storage device (SD, USB) if many folders and files are
saved on the storage device (SD, USB).
• It takes some time to read a storage device (SD, USB) if files other than audio files are
saved on it. Do not save files other than audio files on a storage device (SD, USB) you
want to use with the unit.
You cannot browse a library.
• Save the library information on the storage device (SD, USB). If you connect a storage
device (SD, USB) that does not include the library information, the folder and track lists are
displayed in the hierarchical structure.
History is not displayed.
• Connect a storage device (SD, USB) to the unit. History can be used only when a storage
device (SD, USB) is connected.
Nothing is displayed on the screen.
• If auto standby is turned on, use the unit to exit standby mode. If you do not need to use
auto standby, set [AUTO STANDBY] to [OFF] (page 78).
The scale is not displayed.
• The scale is not displayed if a track is longer than 15 minutes.
PRO DJ LINK does not work well.
• Check if the player number is set properly (set [PLAYER No.] to [AUTO] or a different
number (page 76)).
• Check if the LAN cable is properly connected to the [LINK] terminal.
• Turn on the power of the switching hub.
• Disconnect unnecessary devices from the switching hub.
The screen does not respond to touch or the response is poor.
A different point from the touched point responds.
• Adjust the [TOUCH DISPLAY CALIBRATION] setting in the [UTILITY] settings (page 75).
Additional information
86