Pc/Mac Setup; Installation - PIONEER DJ CDJ-3000 Instruction Manual

PC/Mac setup

To play audio tracks stored on a PC/Mac via the unit, install the relevant driver software on
your computer.
– Audio driver software (for Windows):
Driver software used for outputting the PC/Mac audio when using the unit with DJ software.
You do not need to install this driver if you use a Mac.
– rekordbox (for Mac/Windows) USB connection (LINK Export) driver software:
Driver software used for connecting the unit to rekordbox (Mac/Windows) via USB (LINK
Export).
• For the latest information on the system requirements, compatibility and supported
operating systems, visit the URL below.
pioneerdj.com/support/
• If a PC/Mac without the driver software installed is connected to the unit, errors may occur
on the PC/Mac.
• Malfunctions may occur due to incompatibility with other software installed on a PC/Mac.

Installation

Notes on installation
• Turn the unit off and disconnect the USB cable connected to the unit and the PC/Mac
before installation.
• Close all applications running on the PC/Mac before installation.
• You will need admin rights to install the driver software to your PC/Mac.
• Read the License Agreement terms carefully before installation.
• If you quit the installation halfway through, perform the installation procedure from the
beginning again.
27