Using Click-On Attachments; Removing Or Attaching The Click-On Attachment - Philips 8000 Series Manual

Using click-on attachments

Removing or attaching the click-on attachment

Using the click-on beard styler attachment with comb
1 Make sure the appliance is switched off.
2 Pull the attachment straight off the appliance.
Note: Do not twist the attachment while you
pull it off the appliance.
3 Insert the lug of the click-on attachment into
the slot in the top of the appliance. Then press
down the attachment to attach it to the
appliance (' click').
You can use the beard styler attachment with the
comb attached to style your beard at one fixed
setting, but also at different length settings. You
can also use it to pre-trim any long hairs before
shaving for a more comfortable shave.
The length settings on the beard styler attachment
correspond to the remaining hair length after
cutting and range from 1 to 5mm (3/64 - 3/16in).
1 Attach the attachment to the appliance ('click').
Slide the comb straight into the guiding grooves
on both sides of the beard styler attachment
('click').
13
English