Philips 8000 Series Manual page 14

14
English
2
1
Using the click-on beard styler attachment without
comb
Using the click-on cleansing brush attachment
2 Press the length selector and then push it to
the left or right to select the desired hair length
setting.
3 Switch on the appliance.
4 Move the appliance upwards while you exert
gentle pressure. Make sure the front of the
comb is in full contact with the skin.
5 Clean the attachment after use.
You can use the beard styler attachment without
the comb to contour your beard, moustache,
sideburns or neckline to a length of 0.5mm (1/32
in).
1 Pull the comb off the beard styler attachment.
Note: Grab the comb in the center to pull it off
the beard styler attachment. Do not pull at the
sides of the comb.
2 Switch on the appliance.
3 Hold the beard styler attachment perpendicular
to the skin and move the appliance downwards
while you exert gentle pressure.
4 Clean the attachment after use.
Use the rotating cleansing brush with your daily
cleansing cream. The cleansing brush removes oil