Related Manuals for Philips 8000 Series
Summary of Contents for Philips 8000 Series
- Page 1 User manual 8000 series TAB8905 Register your product and get support at www.philips.com/support...
-
Page 2: Table Of Contents
Contents 1 Important 4 Use your Soundbar Help and support Turn ON and OFF Safety Auto Standby Care for your product Select Modes Care of the environment Adjust the Volume Compliance Dolby sound mode Trademarks: Setup Menu What’s in the Box Factory Reset Bluetooth Operation 2 Your Soundbar... -
Page 3: Important
• Disconnect the product from the power For extensive online support, visit outlet before lightning storms. www.philips.com/support to: • When you disconnect the power cord, • download the user manual and the quick always pull the plug, never the cable. -
Page 4: Care For Your Product
Risk of overheating! Care of the environment • Never install this product in a confined space. Always leave a space of at least four Disposal of your old product and battery inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. -
Page 5: Compliance
You can find the Declaration of Conformity on interference in a residential installation. This www.p4c.philips.com. equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 6: Trademarks
Trademarks: The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. For DTS patents, see http://patents.dts.com. The Bluetooth word mark and logos are registered ® Manufactured under license from DTS, Inc. (for trademarks owned by Bluetooth SIG, Inc. -
Page 7: Your Soundbar
Double blink WPS is active Congratulations on your purchase, and Constant on Connected / Pairing successful welcome to Philips! To fully benefit from the support that Philips offers, register your Soundbar at www.philips.com/support. Connectors This section includes an overview of the Main unit connectors available on your Soundbar. -
Page 8: Wireless Subwoofer
(Play/Pause) Wireless subwoofer Start, pause or resume play in USB/BT mode. Confirm a selection. This section includes an overview of the (Cursors) Wireless subwoofer. • (Previous/Next) Skip to the previous or next track. Navigate Left/Right in menu structure. • Navigate Down/Up in menu structure. (MENU) Enter audio setup. -
Page 9: Prepare The Remote Control
Precautions Concerning Batteries Prepare the Remote Control • When the Remote Control is not to be • The provided Remote Control allows the used for a long time (more than a month), unit to be operated from a distance. remove the battery from the Remote Control to prevent it from leaking. -
Page 10: Connect
3 Connect Note • The full Dolby Atmos experience is only available when the Soundbar is connected to the source via a HDMI 2.0 cable. This section helps you connect your Soundbar • The Soundbar will still function when connected via to a TV and other devices, and then set it up. -
Page 11: Connect To Optical Socket
Using an optical cable, connect the Note OPTICAL connector on your Soundbar to the OPTICAL OUT connector on the TV • Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and ARC must be set to On. or other device. •... -
Page 12: Pair Up With The Subwoofer
Connect the mains cable to the AC~ Unplug both units from the mains sockets Socket of the unit and then into a mains again, then plug them in again after 3 minutes. socket Press and hold the Pair button on the rear Connect the mains cable to the AC~ of the subwoofer for a few seconds. -
Page 13: Use Your Soundbar
4 Use your Select Modes Soundbar Press the button repeatedly on the unit or on the remote control to select the AUX, OPTICAL, HDMI ARC, HDMI 1, This section helps you use the Soundbar to play HDMI 2, BT, USB mode. audio from connected devices. -
Page 14: Setup Menu
AV SYNC Setup Menu Set the Audio Delay. The unit allows you to configure advanced • Video image processing, sometimes longer settings to provide you with an even better than the time required to process the experience. audio signal. This is called “delayed. ” Audio Delay feature is designed to remedy this Press the (MENU) button on the... -
Page 15: Bluetooth Operation
On the Bluetooth device, switch on Operate your audio device directly for Bluetooth, search for and select playback features. Philips TAB8905 to start connection (see the user manual of the Bluetooth Press the VOL +/– buttons to adjust the device on how to enable Bluetooth). -
Page 16: Usb Operation
Set up your device in When the first time set up is not the Philips Sound app. successful, you need to step out of Philips Sound app and restart the app again. Start the set up again. -
Page 17: Wall Mount
5 Wall mount » Attach the wall brackets (x2) to the main unit with the screws removed from the main unit. Note Hang the Soundbar on the fastening screws. • Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. -
Page 18: Product Specifications
6 Product • Dimension (W x H x D ): 1120 x 65.9 x 113.7mm specifications • Weight: 3.7 kg • Operating Temperature: 0°C - 45°C Subwoofer Note • Power Supply: 100-240 V~, 50-60 Hz • Specifications and design are subject to change without •... -
Page 19: Troubleshooting
If you have problems using this product, check the following points before you request service. I can’t find the Bluetooth name of this If you still have a problem, get support at www.philips.com/support. unit on my Bluetooth device • Ensure the Bluetooth function is activated on your Bluetooth device. - Page 20 Specifications are subject to change without notice. Please visit http://www.philips.com/support for the latest updates and documents. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited.