Philips 8000 Series Manual page 21

1 Pull the comb off the beard styler attachment.
2 Rinse the cut hairs off the cutting unit with
3 Rinse the cut hairs off the comb.
4 Remove the cutting unit from the beard styler
5 Rinse cut hairs out of the beard styler
6 Carefully shake off excess water and leave the
7 When the cutting unit is dry attach it to the
2
1
Note: Grab the comb in the center to pull it off
the beard styler attachment . Do not pull at the
sides of the comb.
lukewarm water.
attachment. By pushing the cutting unit from
the beard styler attachment you can remove
any hairs that have accumulated inside the
beard styler. You can also rinse the back of the
cutting unit.
attachment.
comb, cutting unit and beard styler attachment
to dry before next usage.
beard styler attachment.
21
English