Philips 8000 Series Manual page 20

20
English
1
2
Cleaning the click-on attachment
- Orange retaining ring: Place the retaining ring
on the shaving head and turn it clockwise to
reattach the retaining ring. Repeat this process
for the other retaining rings.
Each retaining ring has two recesses that fit
exactly into the projections of the shaving head
holder. Turn the ring clockwise until your hear a
click to indicate that the ring is fixed.
Hold the shaving head holder in your hand
when you reinsert the shaving heads and
reattach the retaining rings. Do not place the
shaving head holder on a surface when you do
this, as this may cause damage.
11 Attach the shaving head holder to the bottom
part of the shaving unit ('click').
Cleaning the click-on cleansing brush
1 Make sure the appliance is switched off.
2 Detach the brush head from the attachment
holder.
Note: Do not twist the brush head while you
pull it off the brush base.
3 Clean both parts thoroughly with warm water
and mild soap.
4 Dry the cleansing brush with a towel.
Cleaning the beard styler attachment
Clean the beard styler attachment after each use.