Using The Click-On Attachments; Removing Or Attaching The Click-On Attachments - Philips S7783/78 Manual

ENGLISH
14
3 Rinse the shaving unit under the tap to ensure
that the shaving unit glides smoothly over your
skin.
4 Switch on the appliance.
5 Move the shaving heads over your skin in
circular movements.
Note: Rinse the shaver under the tap regularly to
ensure that it continues to glide smoothly over your
skin.
6 Dry your face and thoroughly clean the
shaver after use (see chapter 'Cleaning and
maintenance').
Note: Make sure you rinse all foam or shaving gel off
the shaver.

Using the click-on attachments

Note: The accessories supplied may vary for different
products. The box shows the accessories that have been
supplied with your appliance.
Removing or attaching the click-on
attachments
1 Make sure that the appliance is switched off.
2 Pull the attachment straight off the appliance.
Note: Do not twist the attachment while you pull it off
the appliance.
3 Insert the lug of the attachment into the slot
in the top of the appliance. Then press down
the attachment to attach it to the appliance
('click').