Related Manuals for Philips TAB8507
Summary of Contents for Philips TAB8507
- Page 1 Soundbar 8000 Series TAB8507 User manual Register your product and get support at www.philips.com/support...
-
Page 2: Table Of Contents
Connect to Optical socket Connect to Audio in socket Connect to power Pair up with the subwoofer Connect to Wi-Fi (Wireless operation) Connect the soundbar to Philips Play-fi enabled TV 4 Use your soundbar Turn ON and OFF Select modes Adjust the volume... -
Page 3: Important Safety Instructions
1 Important or into the product, disconnect it from the power outlet immediately. Contact safety Consumer Care to have the product checked before use. instructions • Never place the product and accessories near naked flames or other heat sources, including direct sunlight. Read and understand all instructions •... -
Page 4: Care For Your Product
• Never place the product or any Care for your product objects on power cords or on other electrical equipment. Use only microfiber cloth to clean the • If the product is transported in product. temperatures below 5°C, unpack the product and wait until its temperature matches room Care of the environment temperature before connecting it to... -
Page 5: Declaration Of Conformity
Help and support For extensive online support, visit www.philips.com/support to: For 5G Wi-Fi Device • download the user manual and the The device for operation in the quick start guide band 5150–5350 MHz is only for • watch video tutorials (available only... -
Page 6: Fcc Information
FCC information FCC & IC Attention • Cet appareil est conforme à FCC et IC l’exposition aux rayonnements NOTE: This equipment has been tested limites fixées pour un environnement and found to comply with the limits non contrôlé. Cet appareil doit être for a Class B digital device, pursuant to installé... -
Page 7: Your Soundbar
• Images, illustrations and drawings Congratulations on your purchase, shown on this User Manual are for and welcome to Philips! To fully reference only, actual product may benefit from the support that Philips vary in appearance. offers, register your soundbar at www.philips.com/support. -
Page 8: Connectors
(Standby-On) button Connectors Power Action Function This section includes an overview of the state connectors available on your soundbar. Follow source state Semi Press • Wi-Fi is connected. standby • It supports Play-fi button and Airplay2 once Chromecast, Spotify connect, work with Alexa. -
Page 9: Wireless Subwoofer
Wireless subwoofer Remote control This section includes an overview of the This section includes an overview of the wireless subwoofer. remote control. (Standby-On) button Power Action Function state Follow source state Semi Press • Wi-Fi is connected. standby • It supports Play-fi button a bc and Airplay2... -
Page 10: Prepare The Remote Control
(Source) Prepare the remote control • Press to select an input source for • The provided remote control allows soundbar. the unit to be operated from a • In BT mode, press and hold for 3 distance. seconds to disconnect from current •... -
Page 11: Placement
Placement Precautions concerning batteries • Be sure to insert the batteries with Place the subwoofer at least 1 meter (3 correct positive “” and negative feet) away from your soundbar, and 10 “” polarities. centimeters away from the wall. • Use batteries of the same type. -
Page 12: Wall Mount
Wall mount Note ~50mm/2.0" • 628mm / 24.7” Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. 3.5-4mm/0.14 -0.16" • Before wall mounting, make sure the wall can support the weight of your soundbar. -
Page 13: Connect
3 Connect Note • The full Dolby Atmos experience is only This section helps you connect your available when the soundbar is connected to the source via a HDMI 2.0 cable. soundbar to a TV and other devices, and • The soundbar will still function when connected then set it up. -
Page 14: Connect To Optical Socket
HDMI out Using a High Speed HDMI cable, HDMI in Connect to Optical socket connect the HDMI out (eARC/ARC) HDMI out HDMI out connector on your soundbar to the (eARC/ARC) (eARC/ARC) HDMI ARC connector on the TV. Using an optical cable, connect the HDMI in Optical connector on your soundbar HDMI out... -
Page 15: Connect To Power
» Determine the status based on Connect to power the wireless subwoofer indicator. • Before connecting the AC power LED state Status cord, ensure you have completed all Fast blink Subwoofer in pairing mode other connections. Constant on Connected / Pairing successful •... -
Page 16: Connect To Wi-Fi (Wireless Operation)
Android phones, etc.) to the tone and then release the button same Wi-Fi network, you can then use Two tone the Philips Sound app powered by DTS Play-fi to control the soundbar to listen to audio files. Download and install the Philips... - Page 17 (Wi-Fi) button on the soundbar for 8 seconds to reset the Wi-Fi connection. • When the first time set up is not successful, please close the Philips Sound app powered by DTS Play-fi. Restart the app and try the setup again.
-
Page 18: Connect The Soundbar To Philips Play-Fi Enabled Tv
After connection, you can change Connect the soundbar to the device name. There are several Philips Play-fi enabled TV names to choose from or create your own by choosing Custom Name at the end of the name list. Otherwise, Power up your DTS Play-fi TV it follows the default name. -
Page 19: Use Your Soundbar
4 Use your TV Audio Setup soundbar You can also stream the TV’s audio to your home speakers wirelessly. Follow the on-screen setup. This section helps you use the soundbar to play audio from connected devices. DTS Play-Fi TV Audio Before you start Stream this TV's audio to wireless speakes throughout your home. -
Page 20: Select Modes
Select modes Enjoy Dolby Atmos sound Press the button repeatedly on the unit or on the remote control to select the Press button to select a height Optical, Audio in, USB, BT(Bluetooth), surround effects level to best suit HDMI in, HDMI eARC/ARC mode. your personal taste according to your »... - Page 21 Display Description Bass/Treble Select equalizer (EQ) effect Change the low frequency (bass) and high frequency (treble) settings of this Adjust the bass level product. Adjust the treble level BAS -5 ~ BAS +5 • TRE xx TRE -5 ~ TRE +5 •...
- Page 22 Check if there is the latest firmware the audio signal. This is called “delayed.” Audio Delay feature is designed to version on www.philips.com/support. remedy this delay. Search for your model and click on S 00 ~ S 200 •...
-
Page 23: Play From Bluetooth Devices
On the Bluetooth device, switch device, or other devices nearby that operate in on Bluetooth, search for and select the same frequency. “Philips B8507” to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth). Multi-point control... -
Page 24: Play Audio Through Usb
Press the button repeatedly on the unit or on the remote control to select the Optical, HDMI in, HDMI Audio in, ARC mode. Operate your audio device directly for playback features. Press the VOL +/– buttons to adjust the volume to your desired level. Press the button repeatedly on »... - Page 25 5 Product Subwoofer specifications 100-240V~ Power supply 50/60Hz RMS output power 120W Note MAX output power 240W (10% THD ) Power consumption 25 W Specifications and design are subject • to change without notice. Standby power < 0.5 W consumption Frequency response 35Hz - 150Hz Bluetooth / Wireless...
- Page 26 Supported audio formats Format Function HDMI Input HDMI eARC HDMI ARC OPTICAL LPCM 2ch √ √ √ √ LPCM 5.1ch √ √ √ √ LPCM 7.1ch √ √ Dolby Digital √ √ √ √ Dolby Digital Plus √ √ √ Dolby TrueHD √...
- Page 27 • Increase the volume. Press the request service. If you still have a problem, (Volume) on the remote control or get support at www.philips.com/support. on the soundbar. • When using either of the Digital Main unit...
- Page 28 Quality of audio play from a connected Bluetooth device is poor. • When the first time set up is not successful, close the Philips Sound • The Bluetooth reception is poor. app powered by DTS Play-fi. Restart Move the device closer to the the app.
- Page 29 Trademarks: The Adopted Trademarks HDMI, HDMI High- Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing For DTS patents, see http://patents.dts.com. Administrator, Inc. in the United States and Manufactured under license from DTS, Inc. (for other countries.
- Page 30 Specifications are subject to change without notice. Please visit www.Philips.com/support for the latest updates and documents. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.