Technical Data - Festo DRRD Series Operating Instructions Manual

DRRD-12 ... 63
12

Technical data

Size
Design
Cushioning at both
ends
Pneumatic port
Operating medium
Note on the operating medium
Operating pressure
Mounting position
Swivel angle
Setting range on
both sides
Setting range on
1)
both sides
Cushioning angle
(Z minimum swivel
angle)
Repetition accuracy
Ambient temperature
Torque at 6 bar (theor.)
Max. axial load (static)
Max. permissible axial and radial
force on drive shaft
Max. permissible mass
moment of inertia
End-position adjustment
Note on materials
Materials
Housing, cover
Shaft, screws, plug and
retaining plate for DRRD-12
Seals
2)
Product weight
1) Reduction possible on one side > 100°; observe the cushioning angle as the minimum swivel angle
2) Basic design with internal cushioning, without accessories
3) Pressure load (tensile load: 0.33 kN)
Tab. 9
30
12
Semi-rotary drive with twin pistons
P Elastic cushioning, with metal end position
Y9 Hydraulic shock absorber (soft)
Y10 –
M5
Compressed air to ISO 8573-1:2010 [7:4:4]
Lubricated operation possible (in which case lubricated
operation will always be required)
P [bar] 3 ... 8
Y9/Y10 [bar] 2 ... 10
Any
[°] 180
P [°] Infinitely adjustable between –100 ... +10
Y9/Y10 [°] Infinitely adjustable between –100 ... +10
P [°] 32
Y9/Y10 [°] 48
[°] 0.03
[°C] –10 ... +60
[Nm] 0.8
3)
[kN] 1.4
Dependent on the distance of the force application point
( www.festo.com/catalogue)
Depending on the product type
( www.festo.com/catalogue)
By turning the cushioning components
Contains paint-wetting impairment substances (PWIS)
Anodised aluminum
Steel
TPE-U (PU), NBR
P [kg] 0.38
Y9/Y10 [kg] 0.39
16 20 25 32
Hydraulic shock absorber (hard)
M5 M5 M5 G1/8 G1/8 G1/8 G1/4 G3/8
36 45 33 33
43 72 79 82
0.05
1.59 2.41 5.15 10.1 15.8 24.1 53.0 112
1.5 2.4 2.4 3.75 6.1
0.64 0.84 1.35 2.82 4.51 6.07 –
0.65 0.88 1.36 2.98 4.78 6.42 11.3 19.1
Festo – DRRD-12 ... 63-Z6 – 1310b English
35 40 50 63
–
–
–
36 23 –
85 56 61 48
0.03
6.1 9.0 11.0