Cisco TelePresence MX700 Installation Manual page 3
Single camera on a free standing floor stand or a floor stand secured to the wall
Hide thumbs
Also See for TelePresence MX700:
- Reference manual (241 pages) ,
- Administrator's manual (141 pages) ,
- Installation manual (32 pages)
Advertisement
Installation guide for Cisco TelePresence MX700 Single camera - Floor stand
Packaging
Open the plastic snap locks and remove the side walls.
1
Lay the box marked with F-J+L+M flat on the floor. Remove the lid.
2
Boxes F to J, L and M are inside.
Lay the box marked with A, and B+C+E+K flat on the floor. Remove
the lid. Boxes B, C, E and K are inside.
F-J+ L+M
78-100218-03A0 | 2018 JUNE | © 2018 Cisco Systems, Inc. All rights reserved.
D
B+C+E+K
A
...
A
M
Boxes are labeled A to M. This guide refers to the labels.
B+E-G
Shows which boxes are inside.
Tools and screws are in this box.
Page 3
Advertisement
