Download Print this page

Cisco TelePresence MX700 Installation Manual page 10

Single camera on a free standing floor stand or a floor stand secured to the wall
Hide thumbs Also See for TelePresence MX700:

Advertisement

Installation guide for Cisco TelePresence MX700 Single camera - Floor stand
5
Read this before you mount the monitors
The monitors are heavy
We recommend three people working
together to mount the monitors. Two
people should lift the monitor using the
handles as described here. The other
person must help stabilizing the monitor
and check that the monitor enters the
slots properly.
The screws with wing nut, which you
can see from the sides of the monitor,
must enter the center slot on each side
of the lower frame.
78-100218-03A0 | 2018 JUNE | © 2018 Cisco Systems, Inc. All rights reserved.
Use lifting handles
To avoid trapping your fingers, use the lifting
handles at the bottom of the monitor.
Applies to systems that are secured to the
wall: To assure that the camera can move
freely, fasten two bump-ons on the rear of
the top profile, close to the camera.
Page 10

Advertisement

loading