Installation guide for Cisco TelePresence MX700 Single camera - Floor stand
15
Mount camera
F, G
1
Insert the camera.
78-100218-03A0 | 2018 JUNE | © 2018 Cisco Systems, Inc. All rights reserved.
(page 1 of 2)
2
2 ×
M4x8, pan
2 ×
M4x8, pan (one for each stud)
3
2 ×
Studs for camera
Insert the stud underneath the frame. Align its
screw hole with the upper right screw hole of
the camera. Fasten the stud to the top profile
with one screw from above.
Repeat this step for the left side.
Page 20