Cisco TelePresence MX700 Installation Manual page 23

Installation guide for Cisco TelePresence MX700 Single camera - Floor stand
17
Mount loudspeakers
H
Two loudspeakers are pre-installed. Follow
steps 1-3 for the remaining eight loudspeakers.
Connect the cable that is marked with the
1
correct position to the loudspeaker.
Enter the loudspeaker onto the speaker clip.
2
Make sure the cable is not pinched.
78-100218-03A0 | 2018 JUNE | © 2018 Cisco Systems, Inc. All rights reserved.
The loudspeaker
1
cables are marked
with a number.
These numbers
must match the
position of the
loudspeakers, as
shown here.
Fasten with one screw.
3
2
3
4
5
1
2
8 × PT4x10
(one for each loudspeaker)
3
4
5
Page 23