Cisco TelePresence MX700 Installation Manual page 18

Installation guide for Cisco TelePresence MX700 Single camera - Floor stand
13
Organize pre-mounted cables
Stretch out the cables in the channel on top of the monitors, and place
them as illustrated. Do not unplug any cables.
This arrangement makes the installation of the camera module in step 15
and connecting cables in steps 14, 16 and 17 easier.
To the left of camera module
3 ×
78-100218-03A0 | 2018 JUNE | © 2018 Cisco Systems, Inc. All rights reserved.
Left
monitor
Camera cables
Loudspeaker cables
HDMI (step 16)
number 3–5 (step 17)
Power (step 16)
Ethernet (step 16)
On the right side of monitor
Power over Ethernet
(step 14)
Right
monitor
To the right of camera module
HDMI (step 14)
USB, type B (step 14)
5 ×
Loudspeaker cables
number 1–5 (step 17)
Page 18