Exmark Z Turf Equipment Z-SPRAY Operator's Manual page 8

Safety
1. Cutting dismemberment hazard-stay away from moving
parts.
1. Read and understand the operator's manual before
servicing this machine.
2. Grease steering pivots (6x) every 100 hours.
3. Check hydraulic oil level (Only use recommended hydro
oil) every 50 hours.
126-4994
2. Warning-Do Not use any upper frame locations as tie
down points, only use specified lower frame tie down
points; see the Operator's manual for location.
126-5186
4. Service rear axle shafts-see Operator's manual.
5. Check tire pressure - 13 psi (4x) every 50 hours.
6. See engine owner's manual for service.
8
decal126-4994
decal126-5186