Exmark Z Turf Equipment Z-SPRAY Operator's Manual page 10

Safety
1. Engine-Off
2. Engine-On
3. Engine-Start
4. Deflector-Pull knob up to open
5. Deflector-Push knob down to close
6. Throttle-Fast
7. Continuous variable setting
8. Throttle-Slow
9. Spray pressure control
10. On
11. Off
12. Granular spinner control
1. Agitation-Off
2. Agitation-On
3. Decrease pressure-Off
4. Decrease pressure-On
5. Increase pressure-Off
6. Increase pressure-On
135-7247
PRELIMINARY
135-7256
13. Spreader pattern control-rotate counterclockwise to
unlock; rotate clockwise to lock.
14. Spread pattern control-pull handle up if heavy on left side.
15. Spread pattern control-push handle down if heavy on right
side.
16. Spray wand pressure control-Off
17. Spray wand pressure control-Decrease
18. Spray wand pressure control-Increase
19. Spray wand pressure control-On
20. Spray wand pressure control
21. Increase pressure
22. Decrease pressure
23. Increase spread pattern
24. Decrease spread pattern
7. Granular spinner LH lever-Wide distribution-Off
8. Granular spinner LH lever-Wide distribution-On
9. Granular spinner RH lever-Narrow distribution-Off
10. Granular spinner RH lever-Narrow distribution-On
11. Granular spinner knob-Narrow distribution-Increase
12. Granular spinner knob-Narrow distribution-Decrease
10
decal135-7247
decal135-7256