Exmark Z Turf Equipment Z-SPRAY Operator's Manual page 37

1. Narrow distribution-side deflector lowered
2. Forward
3. Effective spreading width—variable 5–22 ft (1.5–6.7 m)
4. Do Not spread when turning 180 degrees
• Watch for changes in the distribution pattern; unequal distribution may lead to striping.
Note: Make sure the unit has been calibrated properly before starting the spreading application.
1. Start the engine and place the throttle midway between the "SLOW" and "FAST" positions.
2. Set the impeller speed to appropriate broadcast rate setting and quickly press the spreader motor and speed
control to turn it on.
Figure 23
5. End of spreading job
6. Property fence
7. Gate
37
Operation
g027374