Safety And Instructional Decals - Exmark Z Turf Equipment Z-SPRAY Operator's Manual

Safety

Safety and Instructional Decals

• Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
• Replace all worn, damaged, or missing safety
signs.
• When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
• If an attachment or accessory has been installed,
make sure current safety signs are visible.
126-2620
1. Pull lever up to
disengage the brake.
133-8062
142-2769
decal126-2620
2. Push lever down to
engage the brake.
decal133-8062
decal142-2769
• New safety signs may be obtained from
your authorized Z Turf Equipment dealer or
distributor.
• Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
• Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your Z Turf Equipment commercial
spreader-sprayer.
1. Main Fuse, 20A
2. Regulator, 20A
6
142-2770
135-6949
3. Start relay
4. GND-Shutdown Relay
decal142-2770
decal135-6949