ViziT BK-30M Operating Instructions

Commutator BK-30M
commutation device to provide intercom between the doorstation and apartment handsets UKP.
Commutator BK-30M
Jumper
Operating instruction
The device does not contain voltage above
Do not perform any connections or repair, when the power is on!
For qualified installation, wiring and servicing refer to technical and commercial partners of VIZIT TM. The list of
companies is given on VIZIT.EU (
The device is fixed either with a springing clip to a DIN-rail (35 mm x 1-2 mm), or with screws (not supplied).
1
2
- Drill two holes (1) in a wall, with
diameter mm and depth 6
- Drive anchors 6х30 (2) into the holes
- Fix the device by fastening 2 screws
in the anchors .
Note. Fasteners are not supplied.
Figure1 - Mounting on a wall
www.vizit-group.com
OPERATING INSTRUCTION
(the device hereinafter) is intended for operation within
1 pc.
3 pcs.
1 pc.

SAFETY INSTRUCTIONS

24 VDC

INSTALLATION

http://vizit.eu/eurounion/)
3
30 mm .
.
3.5х 25 (3)
BK-30M Operating Instruction (revision

PARTS LIST

.
.
(1) - DIN-
(2) - Holder for fixing on a DIN rail
Figure 2 - Mounting on a DIN-rail
VIZIT apartment doorphones as a
1
2
rail, width 35 mm, depth
-
2015- 12 )
BK- 30M
1-2 mm
1 2 /