ViziT BVD-403 Series Manual

Doorstation BVD-403х
The following models are available:
Model
B/W camera
BVD-403A
BVD-403CPL
BVD-403VPL
Abbreviations used in the models names:
A - audio doorstation;
С - colour camera;
V - B/W camera;
P - Pinhole lens;
L - Camera illumination:
5
1
2
3
4
Figure 1 - Doorstation BVD-403x
Doorstation BVD-403x
The product is compatible with similar electromagnetic locks with 20-Ohm impedance and a built-in degaussing
module.
Electromechanical locks with 10-Ohm impedance can be used as well.
Electromagnetic lock should be used together with
Keys Controller VIZIT-KTM600R
Subscriber devices are
- apartment handsets (UKPs);
- VIZIT-M monitors of Series 400.
·
Calls to the subscriber by pressing the
·
A beep at the doorstation and apartment handset / monitor when the
·
Duplex intercom.
·
Door zone video monitoring.
·
Camera LED illumination
·
Door unlocking by pressing the
·
A beep indicates door lock release.
The product does not contain voltage above
Do not make any connections or repair when the power is on.
Connect the grounding wire of the doorstation to the protective ground.
Take care not to spill any liquids or chemically active substances on the product. Switch the power supply off, before
cleaning the doorstation. Clean by wiping with dry soft cloth. Do not use any liquid cleaners, aerosol cleaners or abrasive
agents.
is intended for operation in
Pinhole lens
Colour camera
IR LEDs for BVD-403VPL
White LEDs for BVD-403CPL
1 Camera (for BVD-403CPL, VPL)
2 LEDs for illumination
3 Microphone
4 CALL button
5 Speaker
operates together with electromagnetic locks
or VIZIT-KTM602R
VIZIT® products:
A
button.
button on the apartment handset / monitor.

SAFETY INSTRUCTIONS

25V .
VIZIT video doorphones (Comfort Series).
Illumination
for camera
VIZIT-ML400(S) VIZIT-ML300
.

FEATURES

A
, .
button is pressed.
BVD-403x