Advertisement
Installing the Hard Disks
The system can accommodate two 2.5" SSD/HDD at its front disk bay. With the optional SSD
swappable cage, you can add another two SSD disks for system storage. After you install the
hard drives, make sure the SATA data cables and SATA power cables are connected to the
designated connectors on the motherboard, as indicated in the picture below.
2x 2.5"
HDD/SSD
Bay
1. Locate the disk drive tray at the corner of the system. Loosen the screw indicated in the picture
and slide the tray downwards to have it loosened from the four latching spots. Take the tray out
and prepare to install SATA 2.5" disk drives.
31
Advertisement
