Advertisement
Installing the NIC Modules
This system can accommodate one NIC slim type modules at the front and another one at rear FH/HL PCIe expansion
slot. Based on your application requirements, employ a combination of Riser Cards to fulfill your needs:
1. Rotate the two lock-screws
counterclockwise and loosen them.
2. Remove the door and locate the PCIe
slot for module insertion.
3. Insert your NIC Ethernet module. (The
module shown in the image below is
for reference only).
4. Once the module is firmly seated,
rotate clockwise and tighten the two
lock-screws.
SLOT3
29
PCIe Slot
Align the gold fingers to the PCIe slot
on the motherboard carefully while
inserting this module.
Advertisement
