Table of Contents
Advertisement
plen5stack_manual_en.md
8/31/2020
3. Insert servo motor #1 below servo motor #0 with the gear part facing down. Again, be careful not to
have the cable of servo motor #1 pinched between the motor casing and plastic parts when assembling.
4. Insert servo motor #5 following the same procedure as #1 in the last available position in the bracket.
Ensure all servo motor cables are coming out the "front" face of the bracket.
17 / 60
Advertisement
Table of Contents
Need help?
Do you have a question about the PLEN5Stack and is the answer not in the manual?