Working with the MultiBay
Removing a Drive from the MultiBay
2–6
Inserting a Drive into the MultiBay
If the device does not start, ensure that the necessary device drivers
are installed on the system. If they are not available, they may be
downloaded, at no cost, from the Compaq Web site at
www.compaq.com.
1. Exit all software applications, shut down the operating system
software, and turn off the personal computer if you are inserting
or removing a hard drive.
2. Remove the MultiBay security screw, if it has been installed.
Refer to "Uninstalling the MultiBay Security Screw" on
page 2-4.
Hardware Reference Guide