SD Biosensor F200 User Manual page 31

3. To control the analyzer's automatic turn-off time for power saving, enter the
'Set Timeout' menu. Insert test device stage procedure means that the user
doesn't any action after inserting test device to the analyzer, and then the test
is finished. Standby mode means the user doesn't any action even inserting
test device into the analyzer.
4. To set the time period for calibration and QC, enter the 'Set Calibration and
QC' menu. After calibration and QC procedure is completed, the analyzer will
check the date of calibration and QC and warn the alarm to indicate passed
calibration and QC setting days.
31