Operating The Analyzer; Connect Ac/Dc Adaptor Jack; Set The Analyzer; Chapter 03. Setting And Performing - SD Biosensor F200 User Manual

CHAPTER 03. Setting and Performing

Operating the Analyzer

STEP 1. Connect AC/DC adaptor jack
1-1. Place the analyzer on the bench top within reach of an electrical
outlet. The unit is portable and can be moved to a suitable location
for testing. Ensure counter top is stable, flat and dry. Also check
the bench provides adequate space for the analyzer and barcode
scanner.
1-2. Plug the DC power cord into the power port in the back of the
analyzer. Plug the AC/DC adaptor power cord into the cord and
an available electrical outlet.
1-3. Once the connection is complete, the analyzer is ready for use.
STEP 2. Set the analyzer
2-1 When setting on the analyzer for the first time, operator ID should
be registered. Initial supervisor password is 0000.
2-2 It is recommended to acknowledge following table given on the
supervisor menu.
Stage Menu
Manage
1
Operator
2 Load/Save
3 Update
4 Settings
5 Info
18
Sub Menu
Add / Edit / Delete
Settings / Operator ID / Save test records
F/W update / S/W update
Printed sheet 1/Printed sheet 2/Auto-
Print option
printing
Automatic turn-off time /Insert test
Time out
device time
Calibration & QC Time period
Date / Time / Language / Units /
Network/LIS / Volume / Brightness
General
※ LIS/HIS can be set only when LIS / HIS
Instrument name Instrument name/Facility name
View version / View network
server and connection is ready.