Advertisement
POWER DOOR LOCK WIRING
GROUND-AT-REST Switch -
contact positions vary with style
CHASSIS
GROUND
CONSTANT-ON
+12V (BATT)
CHASSIS
GROUND
Figure 11. Connection to power door locks with a 5-wire switch.
WIRING TO RELEASE 4 DOOR LATCHES
Buttons III, IV, V, and VI will operate door latch releases. For solenoids which require
more than 10 amps, such as Dakota Digital's PDR-2, an external relay should be used for
powering the solenoids on outputs III, IV and V. (see figure 3.) DIP switches #1 and #2 should
both be off.
CONSTANT-ON
FUSED +12V
CHASSIS
DO NOT CONNECT
TO DOOR LATCH RELEASE
ACTIVATED WHEN BUTTON 6 IS PRESSED
Figure 12. Connection for operating four door latch releases.
TO CONSTANT-ON
RED
BLACK
GROUND
CONSTANT-ON
GREEN
FUSED +12V
87
BLUE
85
86
30
BLACK
CONSTANT-ON
RED
FUSED +12V
BLACK
CHASSIS
GROUND
PURPLE
+12V (BATT.)
BLUE
GREEN
BROWN
WHITE
DIP switches #1 & #2 should be OFF
WHITE/GREEN
WHITE
WHITE/VIOLET
RED
CONSTANT-ON
FUSED +12V
8
BLUE
WHITE/BLUE
small wire
DUAL
RELAY
RED
CONSTANT-ON
FUSED +12V
PACK
GREEN
WHITE/RED
small wire
ACTIVATED WHEN BUTTON 3 IS PRESSED
BLUE
TO DOOR LATCH RELEASE
GREEN
TO DOOR LATCH RELEASE
ACTIVATED WHEN BUTTON 4 IS PRESSED
VIOLET
TO DOOR LATCH RELEASE
ACTIVATED WHEN BUTTON 5 IS PRESSED
CONNECT WHITE/GREEN AND
WHITE/VIOLET WIRES TOGETHER
Advertisement
