Download Print this page

Dakota Digital COMMANDER Series Manual page 6

Remote control entry system
Hide thumbs Also See for COMMANDER Series:

Advertisement

POWER TRUNK LIFT WIRING
The trunk lift motor is not included in the base package. These are available from
Dakota Digital separately.
REGULATOR AND SWITCH
NOT INCLUDED
GROUND-AT-REST
Switch - contact
positions vary
with style
+12V
GND
WHITE
GND
BLACK
SINGLE RELAY WIRING FOR AUXILIARY OUTPUTS
The single relay shown is not included in the base kit. These are available from Dakota
Digital (RLY-1), however any 12 volt, automotive relay will work.
FUSED +12V
DO NOT CONNECT
SWITCHED OUTPUT
Figure 8. Connection to relays for operating accessories with auxiliary outputs.
The White/Red, White/Blue, White/Green, White/Violet, and White/Black wires can be
connected to single relays in this same way.
WIRE COLORS COMING FROM
TRUNK LIFT MAY
VARY DEPENDING ON
MANUFACTURER.
WHITE
BLACK
TO CONSTANT-ON
FUSED 12V
WHITE
BLACK
WHITE
BLACK
Figure 7. Connection to power trunk lift motor.
CONSTANT-ON
FUSED +12V
CHASSIS
GROUND
GREEN
RED
87
BLUE
86
85
30
BLACK
CONSTANT-ON
RED
FUSED +12V
BLACK
CHASSIS
GROUND
PURPLE
DUAL
RELAY
BLUE
PACK
GREEN
BROWN
WHITE
white/green & white/violet outputs can also be used
RED
BLACK
CONSTANT-ON
FUSED 12V
WHITE
WHITE/GREEN (or other - output)
6
BLUE
WHITE/BLUE
small wire
CONNECT TO
RED
CONSTANT-ON
FUSED 12V
GREEN
WHITE/RED
small wire

Advertisement

loading

This manual is also suitable for:

Cmd-10kCommander series