Replacement Parts - Raypak CROSSWIND Series Installation And Operation Manual

On/Off Models Only
Parameter
Heating capacity (Btu)
Heating current: Air 80°F (27°C), Water 80°F (27°C)
Heating power: Air 80°F (27°C), Water 80°F (27°C)
Heating current: Air 80°F (27°C), Water 95°F (35°C)
Heating power: Air 80°F (27°C), Water 95°F (35°C)
Compressor RLA/LRA
Fan motor rating
Design pressure (High)
Design pressure (Low)
Refrigerant (R410A)
Net weight
Power supply
Water circulation flow
Noise
Waterproof class

10. REPLACEMENT PARTS

NOTE: To supply you with the correct part, it is important
that you supply the heater model number, serial number
and type of gas when applicable.
Any part returned for replacement under standard
company warranties must be properly tagged with a
return parts tag, completely filled in with the heater serial
number, model number, etc., and shipped to the Company
freight prepaid. If determined defective by the Company
and within warranty, a like part or equal substitution will be
returned, freight collect. Credit will not be issued.
MANUFACTURER:
2151 Eastman Avenue
Oxnard, Ca 93030
1-800-260-2758
67-100 L/min
Table K. Technical Parameters - On/Off Models Only
Crosswind On/Off Models
40-O 50-O
40000 BTU 50000 BTU
7.7A 10.8A
1.65 KW 2.3 KW
9.6A 13.2A
2.0 KW 2.7 KW
9.7A/20A 11.6A/60.2A
0.5 A 0.5 A
≤609 PSIG ≤609 PSIG
≤261 PSIG ≤261 PSIG
44.1 oz 60 oz
4056 oz 4303 oz
208-230VAC/ 1 Ph/60Hz
83-116 L/min
≤50 dB(A) ≤58dB(A)
IPX4 IPX4
65-O
65000 BTU
23