Sequence Events - Arturia KEYSTEP 37 User Manual

9.8.2.2. Seq Swing %
There are 10 values for swing % available from the keyboard when you use the Shift button
and play a key. But inside the MIDI Control Center you can select any number between 50%
and 75%.
Same thing here: to change the swing % value, click on the knob and turn it, or click in the
field and enter a value between 50 and 75.
9.8.2.3. Seq Gate length
The Gate parameter will adjust the length of all of the notes in the selected sequence. The
potential values are 10% (short), 25%, 50%, 75% and 90% (long). Each sequence can have its
own Gate setting.
To make a selection for the selected sequence, click the pull-down menu.
In the graphic on the right the current value is 25%, and the value of 90% is about to be
selected.

9.8.3. Sequence events

9.8.3.1. Enter/delete notes
Double-click on a square inside the piano roll to enter a note. To delete notes, select a note
with a single click or drag a box around several notes. Then press the Delete key on your
computer keyboard.
Remember, KeyStep 37 has a polyphonic sequencer. The four orange bars stacked on top of
each other in the next graphic mean that the first step will play four notes at the same time.
93 Arturia - User Manual KeyStep 37 - The MIDI Control Center