Miele ProLine CS 1411 Operating And Installation Instructions page 8

Deep fat fryer
Table of Contents

Advertisement

Warning and Safety instructions
While the deep fat fryer is under warranty, repairs should only be
undertaken by a Miele authorised service technician. Otherwise the
warranty is invalidated.
Miele can only guarantee the safety of the appliance when genu-
ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.
The deep fat fryer is not intended for use with an external timer
switch or a remote control system.
If the plug is removed from the connection cable or if the cable is
supplied without a plug, the deep fat fryer must be connected to the
electrical supply by a suitably qualified electrician.
If the mains connection cable is damaged, it must be replaced
with a special mains connection cable by a qualified electrician (see
"Electrical connection" in the "Installation" chapter).
During installation, maintenance and repair work, the deep fat
fryer must be completely disconnected from the mains electricity
supply. It is only completely isolated from the electricity supply
when:
– The mains fuse is disconnected.
– The screw-out fuse is removed (in countries where this is applic-
able).
– The plug (if present) is removed from the socket. To do this, pull
the plug and not the mains connection cable.
If the deep fat fryer is built in behind a furniture front (e.g. a door),
do not close the furniture door while the deep fat fryer is in use. Heat
and moisture can build up behind the door when closed. This can
result in damage to the deep fat fryer, the housing unit and the floor.
Do not close the furniture door until the residual heat indicators have
gone out.
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents