Hach 9586sc Basic User Manual page 19

Figure 5 Example of Main Measurement screen
1 Home screen icon
2 Sensor name
3 SD Memory card icon
4 Relay status indicator
5 Measurement value
6 Measurement unit
Icon Description
Home screen The icon may vary depending on the screen or menu being displayed. For
example, if an SD card is installed, an SD card icon appears here when the user is
in the SD Card Setup menu.
SD memory This icon appears only if an SD card is in the reader slot. When a user is in the SD
card Card Setup menu, this icon appears in the upper left corner.
Warning A warning icon consists of an exclamation point within a triangle. Warning icons
appear on the right of the main display below the measurement value. Push the
ENTER key then select the device to view any problems associated with that
device. The warning icon will no longer be displayed once all problems have been
corrected or acknowledged.
Error An error icon consists of an exclamation point within a circle. When an error occurs,
the error icon and the measurement screen flash alternately in the main display. To
view errors, push the MENU key and select Diagnostics. Then select the device to
view any problems associated with that device.
7.2.1 Additional display formats
• From the Main Measurement screen push the UP and DOWN arrow keys to switch between
measurement parameters
• From the Main Measurement screen push the RIGHT arrow key to switch to a split display of up to
4 measurement parameters. Push the RIGHT arrow key to include additional measurements. Push
the LEFT arrow key as needed to return to the Main Measurement screen
• From the Main Measurement screen push the LEFT arrow key to switch to the graphical display
(see Graphical display
keys to switch measurement graphs
Table 4 Icon descriptions
on page 20 to define the parameters). Push the UP and DOWN arrow
7 Warning status bar
8 Date
9 Analog output values
10 Time
11 Progress bar
12 Measurement parameter
English 19