Tohnichi CSPFHW Operating Instruction
  1. Manuals
  2. Brands
  3. Tohnichi Manuals
  4. Power Tool
  5. CSPFHW
  6. Operating instruction

Tohnichi CSPFHW Operating Instruction

Radio frequency torque wrench with double tightening detection
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Radio Frequency Torque Wrench
with Double Tightening Detection
CSPFHW
MODEL
Operating Instruction
To use this product properly and safely, please read this operating instruction carefully
before use. If you have any question about the product and its operations, please contact
your nearest distributor or Tohnichi Mfg. Co., Ltd.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CSPFHW and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tohnichi CSPFHW

Summary of Contents for Tohnichi CSPFHW

  • Page 1 CSPFHW MODEL Operating Instruction To use this product properly and safely, please read this operating instruction carefully before use. If you have any question about the product and its operations, please contact your nearest distributor or Tohnichi Mfg. Co., Ltd.
  • Page 2 • When discarding or storing the battery, insulate it with tape or something. Should this instrument give out abnormal smell or catch fire during use, stop using it immediately and remove the AC adapter from the outlet. Then, move the instrument to a safe place and contact Tohnichi Mfg. Co., Ltd.
  • Page 3 • Use a torque wrench within the measurement range specified in the operating instruction. • Should this instrument give out abnormal smell or catch fire during use, stop using it immediately and remove the AC adapter from the outlet. Then, move the instrument to a safe place and contact Tohnichi Mfg. Co., Ltd.

  • Page 4: Table Of Contents

    Contents 1. Outline 2. Feature 3. Configuration 4. Specifications 5. External View and Each Part Name 6. Precaution for Use 6-1. Caution for correct use 6-2. Instruction for use 6-3. Transmitter battery and communication check 6-4. Battery replacement 6-5. Double tightening judgment angle setting. 7.

  • Page 5: Outline

    "Which torque wrench was used to tighten this bolt (portion)?" → "Which torque wrench tester was used to calibrate this torque wrench?" → "Which...was used to calibrate this torque wrench tester?" For 7-digit ID setting, consult to Tohnichi. • Answer back system The operator is enable to know the communication status by the LED mounted on the transmitter, without checking the receiver or the control device.

  • Page 6: Configuration

    3. Configuration Transmitter Small size Transmitter T-FHM / FH T-FHSLS Torque wrench Torque wrench QSPCAFHP RTDFH Torque wrench Torque wrench QSPFH QLFHSLS Slip type wrench QSPCAFHP, Torque screwdriver RTDFH are Wireless Wireless available Setting BOX SB-FH2 Wireless Wired Relay output RS232C Wired Wired...

  • Page 7: External View And Each Part Name

    If channels are specified when you order to Tohnichi, the group and ID will be marked on the plate. • Plate If torque set are specified when you order to Tohnichi, the setting torque value and unit will be marked on the plate.

  • Page 8: Precaution For Use

    6. Precaution for Use ！ 6-1. Caution for correct use 1. Do not handle torque wrench roughly. 2. Read the operating instruction of torque wrench body before use. 3. In order to detect angular rotation from the trigger torque to the final torque, there is 2 steps of click motion. The 1st light click feeling occurs when it reaches trigger torque (A position).

  • Page 9: Instruction For Use

    6-2. Instruction for use 1. Inset a battery then power on the transmitter and start to angular velocity check and zero adjustment, so stabilize the wrench during the LED blinks in blue and red alternately. 2. If it passed the check, LED blinks twice and turns off. If shock or vibration are given during angle checking, the LED keeps flashing in red.

  • Page 10: Transmitter Battery And Communication Check

    6-3. Transmitter battery and communication check 1. Press TEST button on the side of transmitter TEST switch 2. During pressing the TEST button, LED lights on blue when the battery is enough remain to use. In case LED lights on red, replace the battery to new one, refer to 7-4. Battery replacement. 3.

  • Page 11: Double Tightening Judgment Angle Setting

    6-5. Double tightening judgment angle setting 1. Press SET switch for 3 seconds to enter to double tightening judgment angle setting mode. When it changed to setting mode LED blinks in blue and red alternately. SET Switch TEST button 2. Angular velocity check and zero adjusting is being conducted, so stabilize the wrench while the LED is blinking in blue and red alternately.

  • Page 12: Led Display Messages

    7. LED Display Messages The LED on the transmitter T-FHW shows current setting status or describes error contents. If an error occurs, refer to the error message table to solve the matter. [Setting Mode Messages] LED Disply Mode Reason Blue/Red blinking Conducting zero correction of Angle velocity the gyro sensor...

  • Page 13: Settings With Setting Software

    8. Settings with Setting Software T-FHW can be change setting items through dedicated setting software which Tohnichi provides. Prepare setting box SB-FH2 and RS232C straight cable and install the setting sofware to your PC. * System requirements OS: Windows 7 or later version Microsoft.NET Framework 4.0 or later version.
  • Page 14 4. Click “Install”. Depending on OS system, the message "Do you want to allow the following program from an unknown publisher to make changes to this computer? is displayed. Click the [Install] to proceed with installation. 5. Installation has been completed.
  • Page 15 6. When installation has been completed, a shortcut icon of "Pokayoke Tool Parameter etting Software" will appear on the desktop screen and startup menu. * Trademarks Microsoft and Windows are registered trademarks of the Microsoft Corporation.

  • Page 16: How To Use Setting Software

    8-2. How to use Setting Software 1. Connect the setting box SB-FH2 to PC on which the Pokayoke Tool Parameter Setting Softare has been installed with an RS232C straight cable, and turn on the setting box. * Be sure to set one unit at a time. If multiple transmitters and receivers are set to the setting mode at the same time, they cannot be set correctly.
  • Page 17 4. If it is not connected automatically, make sure that the setting box is power on, RS232C cable has been connecting firmly, and T-FHW is in the setting mode, and then click "Reconnecting".
  • Page 18 5. When "Connected" appears on the screen, select a tab of setting items.
  • Page 19 6. By clicking "GET", the software receives current setting of T-FHW and displays it on the screen. Settings of Wrench body [Description of various settings] Groups from 000 to 255 can be set. - Group 0: 3-digit ID, 7-digit alphanumeric characters without identification. - Judgment code →When multiple torque wrenches are used with one receiver (applicable only when simultaneous transmission is not performed).
  • Page 20 Settings for Double Tightening Judgment [Description of various settings] Input double tightening judgment point of angle degree - Double tigtening detection angle degree Select ON or OFF this function - Double tightening NG signal ON: Wrench sends signal with 3-digits of double tightenng NG ID. OFF: Wrench indicates error message on LED only, signal will not be emited to receiver.
  • Page 21 7. After changing setting items and click "Send", the updated settings will be sent to T-FHW via SB-FH2 wirelessly. Press "Get" and receive setting to confirm the settings have been changed. 8. Setting has been completed Press SET switch of T-FHW to return to normal mode and conduct communication test with receiver.

  • Page 22: Trouble Shooting

    Replace the battery to a new one. The battery is low for use.. of 7-11. LED Display Messages * Periodically check the transmitting and receiving status. * If you have any question, contact your nearest distributor or Tohnichi Mfg. Co., Ltd.

  • Page 23: Dimensions And Specifications

    Torque adjusting hole Set torque value Model name , Torque range ID, Channel Serial number Battery cover Antenna holder SET switch TEST switch Accuracy ±3% Dimensions Tohnichi Torque Range Max. Weight Head Min. - Max. Hand Model [kg] [N . m] Size Force [N] L’...
  • Page 24 TOHNICHI SHANGHAI MFG. CO., LTD. 东仁扭矩仪器（上海）有限公司 TEL.+86 21 3407 4008 FAX.+86 21 3407 4135 RM.5 No.99 Nong1919, Du Hui Road, Minhang, Shanghai, P.R.China ● All rights reserved. No reproduction or republication without written permission. ● ©Tohnichi Mfg. Co., Ltd. All Rights Reserved. 09.19.EN...

Table of Contents