Table of Contents
Advertisement
Back panel view
The components shown in the previous illustration include the following.
Product features
The library provides the following features:
v Automatic tape operations
v Library status display using the operator control panel (OCP), including:
v Manual selection of cartridges to be loaded into the tape drive
v SCSI ID selection using the OCP
v Library and tape drive microcode updates using the SCSI bus or RMC card
v Display of device microcode and hardware revision numbers
1
Vacant slot
2
Remote management card
3
Library controller card
Fibre channel card (if present, otherwise vacant)
4
5
Drive module 1
6
Drive module 2
Power supply
7
8
Product information labels
1 Vacant slot
2 Remote management card
3 Library controller card
4 Slot for future Fibre channel card installation
5 Drive module 1
6 Drive module 2 (optional)
– Tape drive status and activity
– Tape drive error status
– Magazine slot status
– Loaded tape-cartridge conditions
3
Chapter 1. Installation
Advertisement
Table of Contents
